Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1999FORWARD CONTROL 5.7 R, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 99 (ENGINE CONTROLS - REMOVAL, OVERHAUL & INSTALLATION)EMISSION SYSTEMS & SUB-SYSTEMSEVAP CANISTERREMOVAL
1999 GMC Forward Control 5.7 R, Automatic
EVAP Canister: Removal
1999 GMC Forward Control 5.7 R, AutomaticSECTION Removal
WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- The EVAP canister is located under the center of the vehicle. Raise and support vehicle. Note hose location and disconnect EVAP hoses from EVAP canister. See Figure . Remove 3 EVAP canister-to-underbody fasteners.
- Disconnect EVAP vent solenoid electrical connector. EVAP vent solenoid is mounted in top of EVAP canister. See Figure . Remove EVAP canister from vehicle. Remove EVAP vent solenoid from EVAP canister, if necessary. Remove EVAP canister from EVAP canister bracket.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.