Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1999FORWARD CONTROL 5.7 R, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 719 (ENGINE MECHANICAL - 3.8L (UNIT REPAIR))REPAIR INSTRUCTIONSENGINE FLYWHEEL INSTALLATION (AUTOMATIC TRANSMISSION)
1999 GMC Forward Control 5.7 R, Automatic
Engine Flywheel Installation (Automatic Transmission)
1999 GMC Forward Control 5.7 R, AutomaticSECTION Engine Flywheel Installation (Automatic Transmission)
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
J 36660-A Torque Angle Meter
- Install the flywheel.NOTE: Refer to FASTENER NOTICE .
- Install the new flywheel bolts.
Tighten
Tighten the bolts to 15 N.m (11 Ib. ft). Use the J 36660-A to tighten the bolts an additional 50 degrees.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.