Installation Procedure

1999 GMC Forward Control 5.7 R, AutomaticSECTION Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the throttle body inlet hose (3) and the hose clamp to the throttle body.
  2. Install the throttle body inlet hose (3) and the hose clamp to the coolant pipe.
  3. Install the throttle body air inlet duct. Refer to AIR CLEANER INTAKE DUCT for 3.1L.
  4. Fill the cooling system. Refer to Draining and Filling Cooling SystemΒ .
  5. Inspect for leaks.
    Fig 1: Throttle Body Inlet Hoses & Clamps
    G01703846Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.