Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Scheduled Maintenance
When the CHANGE ENGINE OIL light comes on, service is required for the vehicle. On vehicles driven under the best conditions, the engine oil life system may not indicate that vehicle service is necessary for over a year. However the engine oil and filter must be changed at least once a year and at this time the system must be reset.
If the engine oil life system is ever reset accidentally, the customer must have the vehicle serviced within 5 000 km (3,000 mi) since your last service. Reset the oil life system whenever you change the oil. Refer to GM Oil Life System - Resetting for information on the engine Oil Life System and resetting the system.
When the CHANGE ENGINE OIL light appears, certain services and inspections are required. Required services are described in the following paragraphs for Maintenance I and Maintenance II. It is recommended that the first service on a vehicle be Maintenance I, the second service be Maintenance II and that you alternate between the two thereafter. However, in some cases, Maintenance II may be required more often.
- Maintenance I
-
Use Maintenance I if the CHANGE ENGINE OIL light comes on within 10 months since vehicle was purchased or if Maintenance II was performed.
- Maintenance II
-
Use Maintenance II if the previous service performed was Maintenance I. Always use Maintenance II whenever the CHANGE ENGINE OIL light comes on 10 months or more since the last service or if the CHANGE ENGINE OIL light has not come on at all for one year.
| Service | Maintenance I | Maintenance II |
|---|---|---|
| Change the engine oil and filter. Reset the oil life system. Refer to GM Oil Life System - Resetting . | X | X |
| Visually inspect for any leaks or damage. Refer to footnote (13) in Maintenance Footnotes . | X | X |
| Inspect the engine air cleaner filter. If necessary, replace the filter. Refer to Air Cleaner Element Replacement in Engine Controls-3.4L or to Air Cleaner Element Replacement in Engine Controls-3.6L. Refer to footnote (1) in Maintenance Footnotes . | X | X |
| Rotate the tires and inspect the tire inflation pressures and the tire wear. Refer to Tire Rotation and to Tire Inflation Description in Tires and Wheels. | X | X |
| Inspect the brake system. Refer to footnote (3) in Maintenance Footnotes . | X | X |
| Inspect the engine coolant and the windshield washer fluid levels. Add fluid as needed. | X | X |
| Perform any needed additional services. Refer to Additional Required Services . | X | X |
| Inspect the suspension and steering components. Refer to footnote (4) in Maintenance Footnotes . | - | X |
| Inspect the engine cooling system. Refer to footnote (5) in Maintenance Footnotes . | - | X |
| Inspect the wiper blades. Refer to footnote (6) in Maintenance Footnotes . | - | X |
| Inspect the restraint system components. Refer to footnote (7) in Maintenance Footnotes . | - | X |
| Lubricate the body components. Refer to footnote (8) in Maintenance Footnotes . | - | X |
| Inspect the transaxle fluid level and add fluid as needed. | - | X |
| Inspect the throttle system. Refer to footnote (12) in Maintenance Footnotes . | - | X |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.