Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1999FORWARD CONTROL 5.7 R, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 39 (AUTOMATIC TRANSAXLE OVERHAUL & TESTING - 4T65-E)APPLICATION
1999 GMC Forward Control 5.7 R, Automatic
Section 39 (Automatic Transaxle Overhaul & Testing - 4T65-E): Application
1999 GMC Forward Control 5.7 R, AutomaticSECTION Application
WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2003 Pontiac Montana, 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Pontiac Aztek, and 2003 Oldsmobile Silhouette. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Flush oil cooler and oil cooler lines prior to transaxle installation. Oil cooling system contamination may cause premature transaxle failure. For additional information, see LUBRICATION in appropriate SERVICING article.
TRANSAXLE APPLICATION
| Application | Transaxle Model (RPO Code) | ||
|---|---|---|---|
| Buick | |||
| Century (3.1L) | 4T65-E (M15) | ||
| LeSabre (3.8L ) | 4T65-E (MN3 Or M15) | ||
| Park Avenue (3.8L) | 4T65-E (MN3 Or MN7) | ||
| Regal (3.8L) | 4T65-E (M15 Or MN7) | ||
| Rendezvous (3.4L) | 4T65-E (M15 Or M76) | ||
| Chevrolet | |||
| Impala (3.4L & 3.8L) | 4T65-E (M15) | ||
| Lumina (3.1L) | 4T65-E (M15) | ||
| Monte Carlo (3.4L & 3.8L) | 4T65-E (M15) | ||
| Venture (3.4L) | 4T65-E (M15 Or M76) | ||
| Oldsmobile | |||
| Aurora (3.5L) | 4T65E (MN3) | ||
| Intrigue (3.5L) | 4T65-E (MN3) | ||
| Silhouette (3.4L) | 4T65-E (M15 Or M76) | ||
| Pontiac | |||
| Aztek (3.4L) | 4T65-E (M15 Or M76) | ||
| Bonneville (3.8L) | 4T65-E (MN3, M15 Or MN7) | ||
| Grand Prix | |||
| 3.1L | 4T65E (M15) | ||
| 3.8L | 4T65-E (M15 Or MN7) | ||
| Montana (3.4L) | 4T65-E (M15 Or M76) | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.