Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1999FORWARD CONTROL 5.7 R, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 23 (ANALOG INSTRUMENT PANELS)SYSTEM TESTSTEST O: ODOMETER TRIP/RESET SWITCH INOPERATIVE
1999 GMC Forward Control 5.7 R, Automatic
Test O: Odometer Trip/Reset Switch Inoperative
1999 GMC Forward Control 5.7 R, AutomaticSECTION Test O: Odometer Trip/Reset Switch Inoperative
WARNING: This page is about a different car, the 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2001 Chevrolet Monte Carlo, and 2001 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Perform instrument panel cluster system diagnostic system check. See INSTRUMENT PANEL CLUSTER SYSTEM DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM. If instrument panel cluster system diagnostic system check has been performed, go to next step.
- Turn ignition switch to RUN position. Press odometer trip/reset switch. If odometer toggles between trip and season, check for intermittent problem. See DIAGNOSING INTERMITTENTS . Repair or replace as necessary. After repair, go to step 4 . If odometer does not toggle between trip and season, go to next step.
- Replace IPC. See INSTRUMENT PANEL CLUSTER (IPC) under REMOVAL & INSTALLATION and go to next step.
- Check odometer trip/reset switch operation. If switch operates normally, repair is complete. If problem still exists, return to step 2 .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.