Inadvertent Power Relay

1998 GMC Envoy 2WD V6-4.3L VIN WSECTION Inadvertent Power Relay

Outputs:




Range: ON/ OFF
The inadvertent power relay output refers to the commanded state of the inadvertent power relay coil.

ON displays when the BCM commands the inadvertent power relay coil to energize. The command allows the relay to power up the following components:
^ The courtesy lamp relay
^ The vanity lamps
^ The overhead reading lamps
^ The underhood lamps
^ The glove box lamp

OFF displays when the BCM does not command the inadvertent power relay coil to turn ON. The inadvertent power relay coil then does not allow current to the following components:
^ The courtesy lamp relay
^ The vanity lamps
^ The overhead reading lamps
^ The underhood lamp
^ The glove box lamp
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.