Driver Warning Telltales

1998 GMC Envoy 2WD V6-4.3L VIN WSECTION Driver Warning Telltales
The BCM sends requests to the IP cluster in order to turn the IPC telltales ON or OFF. These requests are sent on the Class 2 serial data line. If the

IPC cannot communicate with the BCM via Class 2, the IPC will turn the security telltale ON steady.

The following messages are sent by the BCM to the IPC:
^ Gate ajar (utility only)
^ Over speed (export only)
^ Park brake
^ Seat belt
^ Security light
^ Turn signal reminder
^ High beam ON indicator
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.