Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Chime
1998 GMC Envoy 2WD V6-4.3L VIN WSECTION Chime
Outputs:
Range: NONE/ HEADLAMP/ KEY IN IGNITION/ SEAT BELT/ TURN SIGNAL
The chime output refers to the commanded state of the audible chime.
NONE displays when no audible chime sound is commanded.
HEADLAMP displays when the headlamp on reminder feature commands the chime to turn ON.
KEY IN IGNITION displays when the key in ignition reminder feature and the driver door open feature command the chime to turn ON.
SEAT BELT displays when the driver seat belt not buckled reminder feature commands the chime to turn ON.
TURN SIGNAL displays when the turn signal on reminder feature (ON for more than 0.75 of a mile) commands the chime to turn ON.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.