Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1998CAB & CHASSIS C2500, 5.7 KREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 249 (CRUISE CONTROL SYSTEM)REMOVAL & INSTALLATIONCRUISE CONTROL MODULEINSTALLATION
1998 GMC Cab & Chassis C2500, 5.7 K
Cruise Control Module: Installation
1998 GMC Cab & Chassis C2500, 5.7 KSECTION Installation
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Install the cruise control module (2) to the bracket.
- Install the module to bracket fasteners. Tighten the fasteners to 66 INCH lbs. (7.5 N.m).
- Install the cruise control module and bracket assembly to the vehicle.
- Install the module retaining fasteners (1, 3). Tighten the fasteners to 80 INCH lbs. (9 N.m).
- Connect the electrical connector (2) to the cruise control module. See Fig 1.
- Install cruise control cable from the cruise control module. See CRUISE CONTROL CABLE (3.5L V6) or CRUISE CONTROL CABLE (4.0L V8) .
- Inspect the component operation.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.