Quick Lookups: Fluids

1995 GMC Vandura Special 5.7 KSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil G3500 w/Denso Compressor,w/o Rear AC 8.00 OZS. 0.23 L PAG 46 S
Air Cond Compressor Oil G3500 w/OE Harrison Compressor,w/o Rear AC 8.00 OZS. 0.23 L PAG 150 S
Air Cond Compressor Oil G3500 w/OE Harrison Compressor,w/Rear A/C 11.00 OZS. 0.32 L PAG 150 S
Air Cond Compressor Oil G3500 w/Rear A/C,w/Denso Compressor 11.00 OZS. 0.32 L PAG 46 S
Air Cond Refrigerant Front & Rear 4.50 LBS. 2.04 KG R-134a S
Air Cond Refrigerant Front 3.00 LBS. 1.36 KG R-134a S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Engine Coolant G3500,5.7L Eng w/o Rear Heater 17.00 QTS. 16.08 L 50/50 mixture of DEX-COOL and clean water (preferably distilled) S
Engine Coolant G3500 17.00 QTS. 16.08 L 50/50 mixture of DEX-COOL and clean water (preferably distilled) S
Engine Oil G3500,5.7L Eng RPO 521 & RPO KL5 w/o Filter 5.00 QTS. 4.73 L API - SAE 5W-30 (Below -0Deg.F to Above 100Deg.F) 10W-30 (0Deg.F to Above 100Deg.F, Light Duty Emissions), 5W-30 (Below -60Deg.F, Heavy Duty Emissions) 10W-30 (0Deg.F to Above 100Deg.F, Heavy Duty Emissions) S
Engine Oil G3500,5.7L Eng w/Filter 5.00 QTS. 4.73 L API - SAE 5W-30 (Below -0Deg.F to Above 100Deg.F, Light Duty Emissions), (Below -60Deg.F Heavy Duty Emissions) (10W-30 (0Deg.F to Above 100Deg.F) S
Engine Oil G3500,5.7L Eng w/o Filter 4.00 QTS. 3.78 L API - SAE 5W-30 (Below -0Deg.F to Above 100Deg.F) 10W-30 (0Deg.F to Above 100Deg.F, Light Duty Emissions), 5W-30 (Below -60Deg.F, Heavy Duty Emissions) 10W-30 (0Deg.F to Above 100Deg.F, Heavy Duty Emissions) S
Engine Oil G3500 6.00 QTS. 5.67 L API - SAE 5W-30 (Below -0Deg.F to Above 100Deg.F, Light Duty Emissions), (Below -60Deg.F Heavy Duty Emissions) (10W-30 (0Deg.F to Above 100Deg.F) S
Fuel Tank G3500,5.7L Eng Standard 22.00 GALS. 83.27 L S
Fuel Tank G3500 33.00 GALS. 124.91 L S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.