Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1995SUBURBAN K2500, 6.5 FREPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONREAR SUSPENSIONREMOVAL & INSTALLATIONSPRING BUSHINGREMOVAL
1995 GMC Suburban K2500, 6.5 F
Spring Bushing: Removal
1995 GMC Suburban K2500, 6.5 FSECTION Removal
- Remove the spring assembly. See LEAF SPRING .
- Remove the bushing from the leaf spring. See Figure.
- Place the leaf spring in a press and press the bushing out.
- Clean the spring bushing bore of bits of old bushing, and burrs or corrosion.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.