2WD Models

1995 GMC Suburban C1500, 6.5 FSECTION 2WD Models
WHEEL ALIGNMENT SPECIFICATIONS (2WD MODELS)

Application Preferred Range
I-Beam Front Suspension
Camber (1) 1.25 0.75 To 1.75
Caster (1)(2) 5.0 N/A
Toe-In (1) 0.06 0 To 0.12
Toe-In (3) 0.03 (0.76) 0 To 0.06 (0 To 1.5)
Independent Front Suspension
Camber (1) 0.5 0 To 1
Caster (1) 3.75 2.75 To 4.75
Toe-In (1) 0.12 N/A
(1) Measurement in degrees.
(2) For reference only (non-adjustable).
(3) Measurement in inches (mm).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.