Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1995SUBURBAN C1500, 6.5 FREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSKEYLESS ENTRY SYSTEM - REMOTEPROGRAMMINGREMOTE TRANSMITTER
1995 GMC Suburban C1500, 6.5 F
Remote Transmitter
1995 GMC Suburban C1500, 6.5 FSECTION Remote Transmitter
- Ground pin "G" of the Data Link Connector (DLC). The receiver will respond by locking and unlocking doors within 2 seconds. See Fig 1 .
- Press any button of the first transmitter to be programmed.
- The control module will respond by locking/unlocking doors and activating rear window release.
- Press any button of the second transmitter to be programmed (if used).
- The control module will respond by locking/unlocking doors and activating the rear window release.
- Remove the ground applied to the reprogramming connector.
- Transmitter operation is verified by locking and unlocking the doors and activating the rear window release.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.