Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1995PICKUP C2500, 2D PICKUP EXTRA CAB, 6.5 F, STANDARDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTSEATS - POWERTESTINGPRELIMINARY TESTING
1995 GMC Pickup C2500, 2D Pickup Extra Cab, 6.5 F, Standard
Preliminary Testing
1995 GMC Pickup C2500, 2D Pickup Extra Cab, 6.5 F, StandardSECTION Preliminary Testing
Check power accessory circuit breaker. If motors operate but seat does not move, check for obstruction in seat drive rail or check for broken drive gear. If seat tilts forward and/or rearward but does not move up or down, replace switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.