Quick Lookups: Fluids

1993 GMC Jimmy Base, 2D Utility, 4.3 Z, RWD, StandardSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 2.50 LBS. 1.13 KG R-12 S
Automatic Transmission Fluid 5.00 QTS. 4.73 L Automatic Transmission Fluid DEXRON IIE S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Chev. 8 1/2" ring gear 2.10 QTS. 1.98 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Chev. 9 1/2" ring gear 2.75 QTS. 2.6 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Dana 11" ring gear 4.10 QTS. 3.88 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Dana 9 3/4 ring gear,Heavy Duty 3.00 QTS. 2.83 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Rockwell 12" ring gear 7.00 QTS. 6.62 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Engine Coolant 12.10 QTS. 11.45 L 56/44 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Oil w/Filter 4.50 QTS. 4.25 L API - SAE 5W-30 (Below 0Deg.F to Above 100Deg.F), 10W-30 (Above 0Deg.F to Above 100Deg.F) S
Engine Oil w/o Filter 4.00 QTS. 3.78 L API - SAE 5W-30 (Below 0Deg.F to Above 100Deg.F), 10W-30 (Above 0Deg.F to Above 100Deg.F) S
Fuel Tank 20.00 GALS. 75.7 L S
Manual Transmission Fluid 5 Spd Trans Sectional case 2.00 QTS. 1.89 L Synchromesh Transmission Fluid S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 1050017. S
Transfer Case Fluid 1.30 QTS. 1.23 L Automatic Transmission Fluid DEXRON IIE S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.