Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Left Window Switch
When the ignition switch is in run, battery voltage is supplied to the master door lock/power window switch assembly, the power window circuit breaker, and the Pink (76) wires. See WIRING DIAGRAMS . When any of the up switches are operated, battery voltage is supplied to the window motor through the Dark Blue (164) wire. The window motor is grounded through the DN contact. The motor runs to drive the window up. When any of the DN switches are operated, battery voltage is supplied to the window motor in the opposite direction through the Brown (165) wire. The window motor is grounded through the up contact. The motor runs to drive the window down.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.