SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1992MAGNAVAN 5.7 KREPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONWHEEL ALIGNMENTWHEEL ALIGNMENT SPECIFICATIONS & PROCEDURESALIGNMENT SPECIFICATIONSBLAZER, BRAVADA, JIMMY & SONOMA
1992 GMC Magnavan 5.7 K

Blazer, BRAVADA, Jimmy & SONOMA

1992 GMC Magnavan 5.7 KSECTION Blazer, BRAVADA, Jimmy & SONOMA
ALIGNMENT SPECIFICATIONS (BLAZER, BRAVADA, JIMMY & SONOMA)

Application Preferred Range
Camber (1)(3) 0.8 0.3-1.3
Caster (1)(3) 2 1.5-2.5
Toe-In (2) 0.15 (4) 0.1-0.2 (2.5-5)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
(3) Left and right adjustments must be within 0.5 degree of each other.
(4) Toe-in on left and right side must be set equally per wheel. Steering wheel must be held in straight-ahead position within plus or minus 5.0 degrees.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.