SYS.OK|MANUAL.DB● LIVE
1989 GMC Pickup C2500, 2D Pickup, 6.2 J, Standard

Quick Lookups: Fluids

1989 GMC Pickup C2500, 2D Pickup, 6.2 J, StandardSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 2.50 LBS. 1.13 KG R-12 S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Rear,8.5" Ring Gear 4.20 PTS. 1.98 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Rear,9.5" Ring Gear 6.50 PTS. 3.07 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Rear,Chev. 10 1/2" ring gear 6.50 PTS. 3.07 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Rear,Dana,9.75" Ring Gear 6.00 PTS. 2.83 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Engine Coolant Eng VIN J w/Air Cond 25.00 QTS. 23.65 L 56/44 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Coolant Eng VIN J w/o Air Cond 24.00 QTS. 22.71 L 56/44 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Oil Eng VIN J w/Filter 7.00 QTS. 6.62 L API - SAE 10W-30 S
Fuel Tank 8 FT. Bed Len 34.00 GALS. 128.7 L S
Manual Transmission Fluid 4 Spd Trans 117mm 4.20 QTS. 3.97 L SAE 80W-90 Gear Oil S
Manual Transmission Fluid 4 Spd Trans 85mm 1.80 QTS. 1.7 L SAE 80W-90 Gear Oil S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 1050017. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.