Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1989MAGNAVAN 5.7 K, 3L80/M40REPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
1989 GMC Magnavan 5.7 K, 3L80/M40
Quick Lookups: Fluids
1989 GMC Magnavan 5.7 K, 3L80/M40SECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Engine Coolant | G3500,5.7L Eng | w/o Rear Heater | 17.00 QTS. | 16.08 L | 56/44 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Coolant | G3500 | 20.00 QTS. | 18.92 L | 56/44 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S | |
| Engine Oil | G3500,5.7L Eng | w/o Filter | 4.00 QTS. | 3.78 L | SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 (Above 0Deg.F to Above 100Deg.F), 15W-40 (10Deg.F to Above 100Deg.F), 20W-20 (20Deg.F to Above 100Deg.F), SAE 30 (40Deg.F to Above 100Deg.F) | S | |
| Engine Oil | G3500 | 5.00 QTS. | 4.73 L | SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 (Above 0Deg.F to Above 100Deg.F), 15W-40 (10Deg.F to Above 100Deg.F), 20W-20 (20Deg.F to Above 100Deg.F), SAE 30 (40Deg.F to Above 100Deg.F) | S | ||
| Fuel Tank | G3500,5.7L Eng | Standard | 22.00 GALS. | 83.27 L | S | ||
| Fuel Tank | G3500 | 33.00 GALS. | 124.91 L | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.