Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1984VALUE VAN P3500, 7.4 W, AUTOMATIC, 475/M40REPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONWHEEL ALIGNMENTWHEEL ALIGNMENT SPECIFICATIONS & PROCEDURESWHEEL ALIGNMENT SPECIFICATIONS
1984 GMC Value Van P3500, 7.4 W, Automatic, 475/M40
Wheel Alignment Specifications
1984 GMC Value Van P3500, 7.4 W, Automatic, 475/M40SECTION Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Specification | ||||||
|---|---|---|---|---|---|---|---|
| G10/20 | |||||||
| Axle Gap (Inches) 1 1/2 | |||||||
| Caster (Degrees) | 3.5 | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 1 3/4 | |||||||
| Caster (Degrees) | 3.3 | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 | |||||||
| Caster (Degrees) | 3.1 | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 1/4 | |||||||
| Caster (Degrees) | 2.9 | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 1/2 | |||||||
| Caster (Degrees) | 2.7 | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 3/4 | |||||||
| Caster (Degrees) | N/A | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 | |||||||
| Caster (Degrees) | 2.4 | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 1/4 | |||||||
| Caster (Degrees) | 2.2 | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 1/2 | |||||||
| Caster (Degrees) | 2.1 | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 3/4 | |||||||
| Caster (Degrees) | 1.9 | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 | |||||||
| Caster (Degrees) | 1.8 | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 1/4 | |||||||
| Caster (Degrees) | 1.6 | ||||||
| Camber (Degrees) | .05 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| G30 | |||||||
| Axle Gap (Inches) 1 1/2 | |||||||
| Caster (Degrees) | 2.8 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 1 3/4 | |||||||
| Caster (Degrees) | 2.5 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 | |||||||
| Caster (Degrees) | 2.2 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 1/4 | |||||||
| Caster (Degrees) | 1.9 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 1/2 | |||||||
| Caster (Degrees) | 1.6 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 3/4 | |||||||
| Caster (Degrees) | N/A | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 | |||||||
| Caster (Degrees) | 1.0 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 1/4 | |||||||
| Caster (Degrees) | 0.7 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 1/2 | |||||||
| Caster (Degrees) | 0.5 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 3/4 | |||||||
| Caster (Degrees) | 0.2 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 | |||||||
| Caster (Degrees) | 0 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 1/4 | |||||||
| Caster (Degrees) | -0.2 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| P10 | |||||||
| Axle Gap (Inches) 2 1/2 | |||||||
| Caster (Degrees) | 2.3 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 3/4 | |||||||
| Caster (Degrees) | 2.0 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 | |||||||
| Caster (Degrees) | 1.7 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 1/4 | |||||||
| Caster (Degrees) | 1.5 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 1/2 | |||||||
| Caster (Degrees) | 1.2 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 3/4 | |||||||
| Caster (Degrees) | 0.9 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 | |||||||
| Caster (Degrees) | 0.6 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 1/4 | |||||||
| Caster (Degrees) | 0.4 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 1/2 | |||||||
| Caster (Degrees) | 0.1 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 3/4 | |||||||
| Caster (Degrees) | -0.1 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 5 | |||||||
| Caster (Degrees) | -0.3 | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| P20/30 | |||||||
| Axle Gap (Inches) 2 | |||||||
| Caster (Degrees) | 2.9 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 1/4 | |||||||
| Caster (Degrees) | 2.6 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 1/2 | |||||||
| Caster (Degrees) | 2.3 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 2 3/4 | |||||||
| Caster (Degrees) | 2.0 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 | |||||||
| Caster (Degrees) | 1.7 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 1/4 | |||||||
| Caster (Degrees) | 1.4 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 1/2 | |||||||
| Caster (Degrees) | 1.2 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 3 3/4 | |||||||
| Caster (Degrees) | 0.9 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 | |||||||
| Caster (Degrees) | 0.6 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 1/4 | |||||||
| Caster (Degrees) | 0.4 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 1/2 | |||||||
| Caster (Degrees) | 0.2 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
| Axle Gap (Inches) 4 3/4 | |||||||
| Caster (Degrees) | 0.1 (1)(2) | ||||||
| Camber (Degrees) | 0.2 | ||||||
| Toe-in (Inches) | 3/16 | ||||||
| Steering Axis Inclination (Degrees) | N/A | ||||||
|
|||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.