SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC1984PICKUP C2500, 2D PICKUP, 5.7 LREPAIR AND DIAGNOSISENGINE PERFORMANCEIGNITION SYSTEMDISTRIBUTOR APPLICATION & SPECIFICATIONSDISTRIBUTOR SPECIFICATIONSGM DISTRIBUTORS
1984 GMC Pickup C2500, 2D Pickup, 5.7 L

Gm Distributors

1984 GMC Pickup C2500, 2D Pickup, 5.7 LSECTION Gm Distributors
DISTRIBUTOR AUTOMATIC ADVANCE SPECIFICATIONS (DEGREES & RPM) (1)

Part No. Rot. (2) Deg. RPM Deg. RPM Deg. RPM
1103375 CC 0-6 1400 14-18 2800 20-24 4200
1103376 CC 0-6 1400 12-16 2800 18-22 4200
1103420 CC 0-6 2000 N/A N/A 22-26 4000
1103436 CC 0-8 1300 14-18 2400 20-24 4600
1103460 (3) CC N/A N/A N/A N/A N/A N/A
1103465 CC 0-4 1400 6-10 2000 18-22 4200
1103480 (3) CC N/A N/A N/A N/A N/A N/A
1103481 CC 0-4 1400 6-10 2000 18-22 4200
1103482 CC 0-4 1400 6-10 2000 18-22 4200
1103483 CC 0-4 1400 6-10 2000 18-22 4200
1103520 CC 0-6 1200 12-18 2200 18-24 6000
1103521 CC 0-4 1400 8-12 2200 16-20 4800
1103570 (3) CC N/A N/A N/A N/A N/A N/A
1111388 CC 0-6 1300 12-16 2400 22-26 4100
(1) For distributor RPM and degrees, divide specifications by 2.
(2) CC = Counterclockwise, as viewed from rotor end.
(3) HEI-EST distribitor does not use centrifugal advance.
DISTRIBUTOR VACUUM ADVANCE SPECIFICATIONS (DEGREES) (1)

Part No. Degrees In. Hg Degrees In. Hg
1103375 0 3-6 10 7-9
1103376 0 7-10 10 13-14
1103420 0 9-11 10 12-14
1103436 0 2-4 20 6-9
1103460 (2) N/A N/A N/A N/A
1103465 0 2-4 20 6-9
1103480 (2) N/A N/A N/A N/A
1103481 0 2-4 18 5-7
1103482 0 2-4 24 7-9
1103483 0 2-4 20 6-9
1103520 0 2-4 10 5-7
1103521 0 2-4 10 5-7
1103570 (2) N/A N/A N/A N/A
1111388 0 2-4 20 6-9
(1) For distributor RPM and degrees, divide specifications by 2.
(2) HEI-EST distribitor does not use vacuum advance.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.