Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Windows - Tailgate: Description
Tailgate window system consists of a 12-volt reversible direction motor, internal regulator, and jackscrew type regulator. The internal circuit breaker may require 1 to 3 minutes to reset. Window is controlled by the jackscrew regulator.
The window is operated by an instrument panel switch when the ignition switch is in the "ON" position, or an external key switch located in the tailgate door. The window retracts into tailgate door.
A cut-out switch prevents operation of the window by either switch when the tailgate is open. Circuit is protected by a 30-ampere circuit breaker, located at fuse block.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.