Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2022TRANSIT CONNECT TITANIUM, GASREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXDTC INDEX (FRONT END BODY PANEL SYSTEM - LANE KEEPING SYSTEM)INFORMATION SYSTEM AND ENTERTAINMENT SYSTEM DTCSINFORMATION AND ENTERTAINMENT SYSTEM VEHICLES WITH: AM/FM/CD/SYNC/TOUCHSCREEN DISPLAYGFM
2022 Ford Transit Connect Titanium, Gas
Information and Entertainment System Vehicles With: AM/FM/CD/SYNC/Touchscreen Display: GFM
2022 Ford Transit Connect Titanium, GasSECTION GFM
| DTC | Description | Action |
|---|---|---|
| B1D19:49 | Compact Disc Unit: Internal Electronic Failure | DIAGNOSE all other GFM Diagnostic Trouble Codes (DTCs) first. If no other Diagnostic Trouble Codes (DTCs) are present, INSTALL a new GFM (CD player). |
| B1D19:4B | Compact Disc Unit: Over Temperature | ALLOW the vehicle interior to reach ambient temperature. REPEAT the GFM self-test. If the DTC is retrieved again, INSTALL a new GFM (CD player). If the DTC is not retrieved again, the system is operating correctly. The concern was caused by an temporary overheating condition. |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test AC |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | GO to Pinpoint Test AH |
| U2013:63 | Switch Pack: Circuit / Component Protection Time-Out | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If the DTC is retrieved again, INSTALL a new GFM (CD player). |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If the DTC is retrieved again, INSTALL a new GFM (CD player). |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If the DTC is retrieved again, INSTALL a new GFM (CD player). |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If the DTC is retrieved again, INSTALL a new GFM (CD player). |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AN |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AO |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.