Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2022TRANSIT CONNECT TITANIUM, GASREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 343 (DRIVESHAFT)SPECIFICATIONSGENERAL SPECIFICATIONS
2022 Ford Transit Connect Titanium, Gas
General Specifications
2022 Ford Transit Connect Titanium, GasSECTION General Specifications
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification | |||||
|---|---|---|---|---|---|---|
| Drive pinion flange runout | 0.25 mm (0.010 in) | |||||
| Maximum allowable driveshaft runout (1) | 0.50 mm (0.020 in) | |||||
| Maximum allowable driveshaft runout (2) | 0.65 mm (0.025 in) | |||||
| Maximum allowable driveshaft runout(3) | 0.60 mm (0.023 in) | |||||
| U-joint operating angle range | 0.5°-3.5° | |||||
| U-joint maximum operating angle | 3.5° | |||||
| Front driveshaft runout | 0.76 mm (0.029 in) | |||||
|
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.