ABS Module

2022 Ford Escape SEL, 1.5L Eng VIN 6, FWDSECTION ABS Module
NOTE: Not all vehicles have the anti-lock brake system (ABS) module functional to the passive anti-theft system (PATS). Using a diagnostic scan tool, check for DID C011 in both the powertrain control module (PCM) and the anti-lock brake system (ABS) module. If the anti-lock brake system is functional to the passive anti-theft system PATS, the DID C011 will show ON in both modules.

When the ABS module is replaced, carry out the PMI and parameter reset procedures. There is no need to program keys if the ABS module is replaced.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.