Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2022ESCAPE S, 4WDREPAIR AND DIAGNOSISSTEERINGMANUAL STEERINGELECTRONIC POWER ASSIST STEERING GUIDED ROUTINE TESTINGDTC/SYMPTOM SELECTIONDTC INDEXPSCM - POWER STEERING CONTROL MODULEDTC U0212: LOST COMMUNICATION WITH STEERING COLUMN CONTROL MODULEDESCRIPTION
2022 Ford Escape S, 4WD
DTC U0212: Lost Communication With Steering Column Control Module: Description
2022 Ford Escape S, 4WDSECTION Description
The PSCM monitors the HS-CAN messages when the ignition has been on for more than 5 seconds, the voltage to the PSCM is greater than 6.5 volts and there are no DTCs present inhibiting PSCM operation.
- DTC U0212:00 (Lost Communication with Steering Column Control Module: No Sub Type Information) - This DTC sets when communication between the PSCM and the SCCM fails. For a list of the messages sent to the PSCM from the SCCM, refer to the Network Message List in Description and Operation in the Power Steering article. If messages are missing for more than the allotted time, DTC U0212:00 is set.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.