Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2022BRONCO BASE, 4D UTILITY, 2.3L ENG VIN H, AUTOMATIC T/CASE CONTROLREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
2022 Ford Bronco Base, 4D Utility, 2.3L Eng VIN H, Automatic T/Case Control
Quick Lookups: Fluids
2022 Ford Bronco Base, 4D Utility, 2.3L Eng VIN H, Automatic T/Case ControlSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 2.70 OZS. | 0.07 L | PAG Oil YN-35 | Approximate capacity. | S | ||
| Air Cond Refrigerant | 1.21 LBS. | 0.54 KG | R-1234yf | Approximate capacity. | S | ||
| Automatic Transmission Fluid | 13.10 QTS. | 12.39 L | MOTORCRAFT Automatic Transmission Fluid MERCON ULV | Approximate dry fill capacity. Actual amount may vary during fluid changes. | S | ||
| Brake Fluid | N/A | N/A | MOTORCRAFT DOT 4 LV High Performance Brake Fluid, or equivalent. | Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage. Fill between "max" and "min" lines on reservoir. | S | ||
| Differential Gear Oil | Badlands,Base,Big Bend,Black Diamond,Everglades,Outer Banks, | Front Axle,w/Electronic Locking Front Differential | 26.20 OZS. | 0.77 L | MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant | Approximate capacity. | S |
| Differential Gear Oil | Badlands,Base,Big Bend,Black Diamond,Everglades,Outer Banks, | Front Axle,w/o Electronic Locking Front Differential,w/Front | 30.40 OZS. | 0.89 L | MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant | Approximate capacity. | S |
| Differential Gear Oil | Badlands,Base,Big Bend,Black Diamond,Everglades,Outer Banks, | Front Axle,w/o Electronic Locking Front Differential,w/o Fro | 29.20 OZS. | 0.86 L | MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant | Approximate capacity. | S |
| Differential Gear Oil | Rear Axle,w/Electronic Locking Rear Differential | 63.60 OZS. | 1.88 L | MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant | S | ||
| Differential Gear Oil | Rear Axle,w/o Electronic Locking Rear Differential | 65.30 OZS. | 1.93 L | MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant | S | ||
| Engine Coolant | 2.3L Eng,Automatic Trans | 10.50 QTS. | 9.93 L | MOTORCRAFT Yellow Antifreeze/Coolant Prediluted | Approximate capacity. | S | |
| Engine Oil | 2.3L Eng | w/Filter | 6.00 QTS. | 5.67 L | MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil | Approximate capacity. SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. | S |
| Fuel Tank | 116 IN. WB | 21.10 GALS. | 79.87 L | S | |||
| Manual Transmission Fluid | 2.50 QTS. | 2.36 L | MOTORCRAFT Dual Clutch Transmission Fluid | Approximate dry fill capacity. Actual amount may vary during fluid changes. | S | ||
| Transfer Case Fluid | Automatic T/Case Control | 1.60 QTS. | 1.51 L | MOTORCRAFT Automatic Transmission Fluid MERCON LV | Approximate capacity. | S | |
| Windshield Washer Fluid | N/A | N/A | MOTORCRAFT Premium Windshield Washer Concentrate Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.