Features Of The Throttle Body Assembly Include

2021 Ford Transit-350 XL, 3.5L Eng VIN G, AWDSECTION Features Of The Throttle Body Assembly Include
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2020 Lincoln Navigator, 2020 Lincoln Nautilus, 2020 Lincoln MKZ, 2020 Lincoln Corsair, and 2020 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
  1. A preset stop to locate the WOT position.
  2. A throttle body mounted TP sensor.
  3. A coating sealant on the throttle bore and throttle plate makes the throttle body airflow tolerant to engine intake sludge accumulation. Some vehicles have a decal advising not to clean.
  4. A non adjustable stop screw for close plate idle airflow.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.