Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021TRANSIT-350 HD BASE, VAN CARGO EXTENDED, 3.5L ENG VIN 8, RWDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROLREMOVAL AND INSTALLATIONHYDRAULIC CONTROL UNIT (HCU)INSTALLATION
2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, RWD
Hydraulic Control Unit (HCU): Installation
2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, RWDSECTION Installation
- To install, reverse the removal procedure.
- Using a diagnostic scan tool, complete the PMI process for the ABS module following the on-screen instructions.
- Carry out the following service functions using the scan tool and following the diagnostic scan tool on-screen instructions.
- Carry out the BRAKE SYSTEM PRESSURE BLEEDING .
- Carry out the ABS Calibration.
- Run the PCMPATS programming application and then carry out the Module Initialization (Parameter Reset) using the scan tool and following the diagnostic scan tool on-screen instructions.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.