Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021TRANSIT-350 HD BASE, VAN CARGO EXTENDED, 3.5L ENG VIN 8, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSOEM CONNECTOR END VIEWS - C3040 - C9803CONNECTOR VIEWSCONNECTOR END VIEW (C3501) - DIRECT CURRENT/ALTERNATING CURRENT (DC/AC) INVERTER
2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, RWD
Connector End View (C3501) - DIRECT CURRENT/ALTERNATING CURRENT (DC/AC) INVERTER
2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, RWDSECTION Connector End View (C3501) - DIRECT CURRENT/ALTERNATING CURRENT (DC/AC) INVERTER
| Connector: | Description | Color | Harness | Base Part # | Service Pigtail |
|---|---|---|---|---|---|
| C3501 | DIRECT CURRENT/ALTERNATING CURRENT (DC/AC) INVERTER | LT GY | 15K857 | part# N/A | See Below |
| Terminal Part Number | Service Part Number | Size |
|---|---|---|
| 97BG-14474-CCA | JU2Z-14474-AB | 6.30 |
| 97BG-14474-CAA | KU2Z-14474-EA | 6.30 |
| Pin | Circuit | Gauge | Circuit Function | Qualifier | Terminal Part Number | |||
|---|---|---|---|---|---|---|---|---|
| 1 | SB171 (WH-RD) | 12 | FUSE - 71 OR CIRCUIT BREAKER | 97BG-14474-CCA | ||||
| 2 | GD382 (BK-GY) | 12 | GROUND - CROSS MEMBER MIDDLE DRIVER OR LEFT | 97BG-14474-CCA | ||||
| 3 | CBP12 (GN-WH) | 20 | FUSE - 12 OR CIRCUIT BREAKER | 97BG-14474-CAA | ||||
| 4 | * | * | Not Used | N/A | ||||
Available Pigtail Kits
Pigtail Kit Part Number WPT-1177
Service Part Number:
AU2Z-14S411-BHA
Gauge:
10
Pin material:
Tin
Cavities:
4
Vehicle Uses:
- Mating Connector WPT-1408
- Resistor - Blower Motor (Front)
- Switch - Heater / A/C Blower (Front)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.