Connector End View (C3071A) - POWER SLIDING DOOR MODULE, RIGHT

2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, RWDSECTION Connector End View (C3071A) - POWER SLIDING DOOR MODULE, RIGHT
Connector: Description Color Harness Base Part # Service Pigtail
C3071A POWER SLIDING DOOR MODULE, RIGHT LT GY 14A006 part# N/A See Below

GFDWR127388Courtesy of FORD MOTOR COMPANY
Terminal Part Number  Service Part Number  Size 
XF2T-14474-DA DU2Z-14474-EA 2.80
97BG-14474-ABB DU2Z-14474-DA 1.50
97BG-14474-AAB DU2Z-14474-DA 1.50
Pin  Circuit  Gauge  Circuit Function  Qualifier  Terminal Part Number 
1 GD348 (BK-YE) 12 GROUND - PILLAR C OR QUARTER PANEL RIGHT XF2T-14474-DA
2 VDB06 (GY-OG) 22 CONNECTOR - DIAGNOSTIC # CAN BUS MEDIUM SPEED HIGH 97BG-14474-AAB
3 VDB07 (VT-OG) 22 CONNECTOR - DIAGNOSTIC # CAN BUS MEDIUM SPEED LOW 97BG-14474-AAB
4 * * Not Used N/A
5 CPRF7 (BU-WH) 18 CTRL MOD. - SLIDING DOOR PASSENGER OR RIGHT # OBW MOTOR RELEASE/REWIND (RELEASE IF POS) 97BG-14474-ABB
6 CPRF8 (GN-OG) 18 CTRL MOD. - SLIDING DOOR PASSENGER OR RIGHT # OBW MOTOR RELEASE/REWIND (REWIND IF POS) 97BG-14474-ABB
7 SB141 (RD) 12 FUSE - 41 OR CIRCUIT BREAKER XF2T-14474-DA
8 GD348 (BK-YE) 12 GROUND - PILLAR C OR QUARTER PANEL RIGHT XF2T-14474-DA
9 * * Not Used N/A
10 * * Not Used N/A
11 CPRF1 (GY-BN) 18 MOTOR - SLIDING DOOR PASSENGER OR RIGHT # OBW HOME POSITION SWITCH 97BG-14474-ABB
12 CPRF4 (YE-VT) 20 LATCH - SLIDING DOOR PASSENGER OR RIGHT # CLAW (PRIMARY) 97BG-14474-AAB
13 CPRF5 (BN-GN) 20 LATCH - SLIDING DOOR PASSENGER OR RIGHT # PAWL (SECONDARY) 97BG-14474-AAB
14 SB141 (RD) 12 FUSE - 41 OR CIRCUIT BREAKER XF2T-14474-DA

Available Pigtail Kits 

Pigtail Kit Part Number WPT-955

GFDWR1201Courtesy of FORD MOTOR COMPANY

Service Part Number:

3U2Z-14S411-BJAC 

Gauge:

12 14 16 

Pin material:

Tin & Silver 

Cavities:

14 

Vehicle Uses:

  • Connector - Inline
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.