SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021TRANSIT-350 HD BASE, VAN CARGO EXTENDED, 3.5L ENG VIN 8, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEWINDOWSGLASS, FRAMES AND MECHANISMSDESCRIPTION AND OPERATIONGLASS, FRAMES AND MECHANISMS - OVERVIEW
2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, RWD

Glass, Frames and Mechanisms - Overview

2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, RWDSECTION Glass, Frames and Mechanisms - Overview

Overview 

Power Windows 

Standard power window features include one-touch up/down operation (driver front window only) when the master window control switch is momentarily pressed to the second detent and released.

The power windows operate only when the delayed accessory feature is active. The delayed accessory feature is active whenever the ignition is on, or up to 10 minutes after the ignition is changed from on to off while the front driver and passenger doors remain closed.

The master window control switch may be used to raise or lower the driver or passenger front door windows. The passenger door window can also be operated from the passenger door window control switch.

Heated Windshield 

NOTE: When you switch maximum defrost on, the heated windshield, rear window defrost and air conditioning compressor turns on. When you switch maximum defrost off, the heated windshield and rear window defrost remain on.

Press the heated windshield switch (integral to the HVAC module) to activate the heated windshield. The heated windshield automatically turns off after a short period of time.

Rear Window Defrost 

NOTE: When you switch maximum defrost on, the heated windshield, rear window defrost and air conditioning turn on. When you switch maximum defrost off, the heated windshield and rear window defrost remain on.

When the rear window defrost is activated from the switch (integral to the HVAC module), the rear window defrost grids are energized, warming/heating the glass to improve rearward visibility.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.