Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD2021TRANSIT-350 HD BASE, VAN CARGO EXTENDED, 3.5L ENG VIN 8, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR BODY PANELSBODY CLOSURESGENERAL PROCEDURESREAR DOOR ALIGNMENTADJUSTMENT

2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, RWD

Rear Door Alignment: Adjustment

2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, RWDSECTION Adjustment

NOTE: Removal steps in this procedure may contain installation details.

All alignments

Remove the pin type retainers and the rear step trim panel.

Courtesy of FORD MOTOR COMPANY
Remove the bolts and the rear door lower striker assembly.
Torque

: 18 lb.ft (25 Nm)

Courtesy of FORD MOTOR COMPANY

Left rear cargo door in and out, up and down alignment
Loosen the bolts enough to permit movement of the door.
Torque

: 18 lb.ft (25 Nm)

Courtesy of FORD MOTOR COMPANY
Adjust the door to specification. Refer to: BODY AND FRAME .

Courtesy of FORD MOTOR COMPANY

Left rear cargo door left, right and tilt alignment
Remove the striker trim.

Courtesy of FORD MOTOR COMPANY
Remove the bolts and the striker assembly.
Torque

: 18 lb.ft (25 Nm)

Courtesy of FORD MOTOR COMPANY
Remove the D pillar trim panel. Refer to: D-Pillar Trim Panel .
1. Loosen the inner nuts enough to permit movement of the door.
  Torque
  
  : 18 lb.ft (25 Nm)
2. Loosen the nuts enough to permit movement of the door.
  Torque
  
  : 89 lb.in (10 Nm)
3. Loosen the bolts enough to permit movement of the door.
  Torque
  
  : 18 lb.ft (25 Nm)
Courtesy of FORD MOTOR COMPANY
Adjust door to specification. Refer to: BODY AND FRAME .

Courtesy of FORD MOTOR COMPANY

Right rear cargo door in and out, up and down alignment
NOTE: The left cargo door must be aligned correctly to ensure the correct alignment of the right cargo door.

Loosen the bolts enough to permit movement of the door.

Torque

: 18 lb.ft (25 Nm)

Courtesy of FORD MOTOR COMPANY
Adjust the door to specification. Refer to: BODY AND FRAME .

Courtesy of FORD MOTOR COMPANY

Right rear cargo door left, right and tilt alignment
NOTE: The left cargo door must be aligned correctly to ensure the correct alignment of the right cargo door.

Remove the striker trim.

Courtesy of FORD MOTOR COMPANY
Remove the bolts and the striker assembly.
Torque

: 18 lb.ft (25 Nm)

Courtesy of FORD MOTOR COMPANY
Remove the D pillar trim panel. Refer to: D-Pillar Trim Panel .
1. Loosen the nuts enough to permit movement of the door.
  Torque
  
  : 89 lb.in (10 Nm)
2. Loosen the bolts enough to permit movement of the door.
  Torque
  
  : 18 lb.ft (25 Nm)
3. Loosen the inner nuts enough to permit movement of the door.
  Torque
  
  : 18 lb.ft (25 Nm)
Adjust the door to specification. Refer to: BODY AND FRAME .

Courtesy of FORD MOTOR COMPANY

All alignments
Check the body to rear door dimensions. Refer to: BODY AND FRAME .
Install the removed components.