Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021TRANSIT-350 HD BASE, VAN CARGO EXTENDED, 3.5L ENG VIN 8, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 598 (PASSIVE ANTI-THEFT SYSTEM (PATS) - VEHICLES WITH: KEYED IGNITION)DIAGNOSIS AND TESTINGPASSIVE ANTI-THEFT SYSTEM (PATS)DTC CHART(S)GLOBAL CUSTOMER SYMPTOM CODE (GCSC) CHART
2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, AWD
Global Customer Symptom Code (GCSC) Chart
2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, AWDSECTION Global Customer Symptom Code (GCSC) Chart
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Global Customer Symptom Code Chart
| Customer Symptom | Action |
|---|---|
| Start/Run/Move > Starting > No Crank > Always | GO to Pinpoint Test A |
| Start/Run/Move > Starting > Ignition Switch/Key > Reprogramming | GO to Pinpoint Test B |
| Start/Run/Move > Starting > Ignition Switch/Key > Reprogramming | GO to Pinpoint Test C |
| Safe and Secure > Anti-Theft > Control > Inoperative | GO to Pinpoint Test A |
| Safe and Secure > Remote Entry > Control > Reprogramming | GO to Pinpoint Test B |
| Safe and Secure > Remote Entry > Control > Reprogramming | GO to Pinpoint Test C |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.