Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021TRANSIT-350 HD BASE, VAN CARGO EXTENDED, 3.5L ENG VIN 8, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 545 (GENERAL INFORMATION)GENERAL PROCEDURESWIRE TERMINAL INSPECTION AND REMOVAL
2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, AWD
Wire Terminal Inspection and Removal
2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, AWDSECTION Wire Terminal Inspection and Removal
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING .
Disconnect
- Audio Front Control Module (ACM), Body Control Module (BCM) and Instrument Panel Cluster (IPC) Electrical Connector
Callout Connector 1 External terminal release tang 2 Electrical connector locking tab - Audio Front Control Module (ACM), Front Controls Interface Module (FCIM), Gateway Module A (GWM), and Heating, Ventilation and Air Conditioning (HVAC) Control Module Electrical Connector
Callout Connector 1 Distance to release tang - 0.2953 in (7.5 mm) (inner terminal) - 0.4646 in (11.8 mm) (outer terminal) 2 Terminal width size - 0.0244 in (.62 mm) (inner terminal) - 0.1102 in (2.8 mm) (outer terminal) - Body Control Module (BCM) Electrical Connector
Callout Connector 1 Terminal width size - 0.1102 in (2.8 mm) (inner terminal) - 0.2480 in (6.3 mm) (outer terminal) 2 Distance to release tang - 0.1260 in (3.2 mm) (inner terminal) - 0.1575 in (4 mm) (outer terminal) 3 Terminal width size - 0.0591 in (1.5 mm) 4 Distance to release tang - 0.3780 in (9.6 mm) (lower terminal) - Body Control Module (BCM) Electrical Connector
Callout Connector 1 Terminal width size - 0.0591 in (1.5 mm) (inner terminal) - 0.1102 in (2.8 mm) (outer terminal) 2 Distance to release tang - 0.3780 in (9.6 mm) (inner terminal) 3 Distance to release tang - 0.1575 in (4 mm) 4 Distance to release tang - 0.1575 in (4 mm) 5 Terminal width size - 0.2480 in (6.3 mm) - Body Harness In-line Electrical Connector
Callout Connector 1 Distance to release tang - 0.3346 in (8.5 mm) 2 Terminal width size - 0.1102 in (2.8 mm) 3 Terminal width size - 0.0591 in (1.5 mm) 4 Distance to release tang - 0.3858 in (9.8 mm) (inner) - Body Harness In-line Electrical Connector
Callout Connector 1 Distance to release tang - 0.3543 in (9 mm) 2 Terminal width size - 0.0591 in (1.5 mm) (inner terminal) - 0.1102 in (2.8 mm) (outer terminal) 3 Terminal width size - 0.2480 in (6.3 mm) 4 Distance to release tang - 0.3543 in (9 mm) - Body Harness In-line and Seat Harness Electrical Connector
Callout Connector 1 Distance to release tang - 0.4331 in (11 mm) 2 Terminal width size - 0.0591 in (1.5 mm) 3 Terminal width size - 0.0591 in (1.5 mm) 4 Distance to release tang - 0.4331 in (11 mm) - Body Harness In-line and Seat Module Electrical Connector
Callout Connector 1 Terminal width size - 0.0591 in (1.5 mm) 2 Distance to release tang - 0.3937 in (10 mm)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.