Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021TRANSIT-350 HD BASE, VAN CARGO EXTENDED, 3.5L ENG VIN 8, AWDREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROLS - PINPOINT TESTS (EXCEPT DIESEL & HYBRID) (A TO H)PINPOINT TESTS DS: EXHAUST GAS RECIRCULATION TEMPERATURE (EGRT) SENSORINTRODUCTION
2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, AWD
Pinpoint Tests DS: Exhaust Gas RECIRCULATION Temperature (EGRT) Sensor: Introduction
2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, AWDSECTION Introduction
This pinpoint test is intended to diagnose the following:
- harness circuits: EGRT12, and SIGRTN
- exhaust gas recirculation temperature bank 1, sensor 2 (EGRT12)
| Pin | Circuit |
|---|---|
| 2 | SIGRTN (Signal Return) |
| 1 | EGRT12 (Exhaust Gas Recirculation Temperature Bank 1, Sensor 2) |
Powertrain Control Module (PCM) Connector
For PCM connector views or reference values, refer to Reference Values.
| Vehicle | Connector | Pin | Circuit |
|---|---|---|---|
| Corsair 2.5L, Escape/Kuga 2.5L | 198 PIN | E35 E76 |
SIGRTN EGRT12 |
| F-150 | 306 PIN | E39 E73 |
SIGRTN EGRT12 |
| All other vehicles | 198 PIN | E13 E69 |
SIGRTN EGRT12 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.