Normal Operation And Fault Conditions

2021 Ford Transit-350 HD Base, Van Cargo Extended, 3.5L Eng VIN 8, AWDSECTION Normal Operation And Fault Conditions

When the ignition is set to ON, the ABS module and the BCM share VIN information through the GWM over the HS-CAN1 and HS-CAN2. If the ABS module has a different VIN than the BCM due to incorrect module configuration, this DTC sets.Β 

PPT AF ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U3002:62 Vehicle Identification Number: Signal Compare Failure Sets when the VIN message sent by the BCM, through the GWM and over the HS-CAN, does not match the VIN stored in the ABS module.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.