P060D - Internal Control Module Accelerator Pedal Position Performance

2021 Ford Explorer XLT, RWDSECTION P060D - Internal Control Module Accelerator Pedal Position Performance
DTC DESCRIPTION P060D - INTERNAL CONTROL MODULE ACCELERATOR PEDAL POSITION PERFORMANCE

Description:  This DTC sets when an error occurs in the PCM. This DTC sets when the PCM detects a concern identifying an issue with an accelerator pedal position (APP) sensor signal or with processing the brake pedal sensor input.
Possible Causes: 
  • Module programming error
  • Damaged APP sensor
  • Damaged PCM
Diagnostic Aids:  An APP1 or APP2 PID value may indicate a concern. Verify the PCM is at the latest calibration level.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test DK.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.