Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Exhaust Gas RECIRCULATION Temperature (EGRT) Sensor
The EGRT bank 1, sensor 2 (EGRT12) is a thermistor device in which resistance changes with temperature. The EGRT 12 sensor is an input to the PCM. The electrical resistance of the sensor increases as the temperature decreases, and the resistance decreases as the temperature increases. The varying resistance changes the voltage drop across the sensor terminals and provides electrical signals to the PCM corresponding to temperature.
The EGRT12 sensor is primarily used for EGR flow calculation and is also used for EGR cooler diagnostics. The EGRT12 sensor monitors the exhaust gas temperature downstream of the EGR cooler. The EGRT12 sensor is located between the EGR cooler and the EGR valve on the EGR orifice tube assembly.
Typical EGRT Sensor
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.