Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 5 (ENGINE - 2.7L ECOBOOST (238KW/324PS) SPECIFICATIONS, DESCRIPTION AND OPERATION, DIAGNOSIS AND TESTING, GENERAL PROCEDURES, REMOVAL AND INSTALLATION(PT1))REMOVAL AND INSTALLATIONENGINE FRONT COVERINSTALLATION
2021 Ford Edge SE, 4WD
Engine Front Cover: Installation
2021 Ford Edge SE, 4WDSECTION Installation
WARNING: This page is about a different variant/trim than selected.
- Install new engine front cover gaskets.
-
NOTE: The engine oil gallery seal (6G068) is asymmetrical and must be installed exactly as shown or damage to the engine may occur.
- Lubricate the new oil gallery seal (6G068) with clean engine oil.
- Install the new oil gallery seal (6G068) with the squared edge toward the engine block.
-
NOTE: Failure to use Motorcraft® High Performance Engine RTV Silicone may cause the engine oil to foam excessively and result in serious engine damage.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.