Section 13 (Power Transfer Unit - 2.7L ECOBOOST (238KW/324PS)): Specifications

2021 Ford Edge SE, 4WDSECTION Specifications
WARNING: This page is about a different variant/trim than selected.

Lubricants, Fluids, Sealers and Adhesives 

Item Specification
Transfer case fluid  
Material
: Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant / XY-75W85-QL (WSS-M2C942-A)
Architecture Powertrains Capacity
Low Torque PTU 2.0L GTDI 8F35 0.375 +/- 0.05L
2.0L GTDI 8F35 (GCC) 0.46 +/- 0.05L
High Torque PTU 2.7L GTDI 8F57 0.46 +/- 0.05L
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.