Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Symptom Chart - Steering System
2021 Ford Edge SE, 4WDSECTION Symptom Chart - Steering System
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| Condition | Possible Sources | Action |
|---|---|---|
| Steering has lack of assist or inconsistent assist | Contaminated power steering fluid Steering gear Power steering pump Restricted power steering lines/hoses |
GO to Pinpoint Test AΒ |
| Excessive steering wheel play | Steering gear Steering column shaft/ coupling Steering linkage |
GO to Pinpoint Test BΒ |
| Steering system drift/pull/ wander | Steering column shaft/U-joints Steering gear Steering gear mounts |
GO to Pinpoint Test CΒ |
| Poor returnability/sticky steering | Binding steering column shaft/coupling U-joints | INSTALL a new steering column shaft. Refer to: Steering Column . |
| Suspension components | To continue the suspension diagnosis. Refer to: Suspension System . | |
| Binding steering column bearing(s) | INSTALL a new steering column. Refer to: Steering Column . | |
| Binding dash boot seal | INSTALL a new dash boot seal. Refer to: Steering Column Opening Seal . | |
| Steering gear | The steering gear cannot be adjusted. INSTALL a new steering gear as necessary. Refer to: Steering Gear - Vehicles With: Hydro-Boostβ’Β . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.