Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 717 (REAR VIEW MIRRORS)
2021 Ford Edge SE, 4WD
Section 717 (Rear View Mirrors)
2021 Ford Edge SE, 4WDSECTION Section 717 (Rear View Mirrors)
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Description And Operation
- Rear View Mirrors - Overview
- Overview
- Exterior, Manual
- Exterior, Power
- Exterior, Heated
- Exterior, Memory
- Exterior, Power Folding
- Exterior, Power Telescoping
- Exterior, Auto-Dimming
- Exterior, Turn Signals
- Exterior, Parking Lamps
- Exterior, Spot Lamps
- Exterior, Puddle Lamps
- Exterior, BLIS®/ CTA Light Emitting Diodes (LEDs)
- Exterior, Side Cameras
- Interior
- Overview
- Rear View Mirrors - System Operation and Component Description
- System Operation
- System Diagram - Exterior, Power, Without Memory
- Network Message Chart
- System Operation - Exterior, Power, Without Memory
- System Diagram - Exterior, Power, With Memory
- System Operation - Exterior, Power, With Memory
- System Diagram - Exterior, Heated
- System Operation - Exterior, Heated
- System Diagram - Exterior, Power Fold
- System Operation - Exterior, Power Fold
- System Diagram - Exterior, Power Telescoping
- System Operation - Exterior, Power Telescoping
- System Operation - Exterior Auto-Dimming
- System Operation- Interior Manual-Dimming
- System Operation- Interior Auto-Dimming
- Component Description
- System Operation
- Rear View Mirrors - Overview
- Diagnosis And Testing
- Rear View Mirrors
- DTC Chart(s)
- Symptom Chart(s)
- Pinpoint Tests
- Pinpoint Test A: A Single Mirror Is Inoperative/Does Not Operate Correctly
- Pinpoint Test B: A Single Mirror Horizontal Or Vertical Operation Does Not Function Correctly
- Pinpoint Test C: The Exterior Mirror Memory Recall Feature Is Inoperative/Does Not Operate Correctly
- Pinpoint Test D: One Or Both Heated Exterior Mirrors Are Inoperative Or Always On (Without Memory Mirrors)
- Pinpoint Test E: A Single Mirror Horizontal Or Vertical Operation Does Not Function Correctly
- Pinpoint Test F: The LH (Left-Hand) Exterior Auto-Dimming Mirror Is Inoperative Or Always In A Darkened State
- Pinpoint Test G: The Interior Auto-Dimming Mirror Does Not Operate Correctly
- Pinpoint Test H: One Or Both Exterior Mirrors Fold Inward Due To Wind Pressure
- Pinpoint Test I: Both Exterior Mirrors Are Inoperative (With Or Without Memory Mirrors)
- Pinpoint Test J: The Left Hand (LH) And Right Hand (RH) Heated Exterior Mirrors Do Not Defrost At The Same Rate
- Pinpoint Test K: An Exterior Mirror Selection Switch Light Emitting Diode (Led) Is Inoperative (Exterior Mirror Selection Switch Functions Normally)
- Pinpoint Test L: The Exterior Mirror Puddle Lamp Is Inoperative Or Always On
- Pinpoint Test M: The Exterior Mirror Turn Signal Is Inoperative Or Always On
- Pinpoint Test N: The Blind Spot Information System (BLIS)® Indicator Is Inoperative Or Always On
- Pinpoint Test O: The Interior Mirror Is Blemished
- Pinpoint Test P: The Interior Mirror Vibrates Or Is Loose
- Pinpoint Test Q: Exterior Mirror Housing Vibrates Or Is Loose
- Pinpoint Test R: Exterior Mirror Glass Vibrates Or Is Loose
- Pinpoint Test S: Wind Noise
- Rear View Mirrors
- General Procedures
- Removal And Installation
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.