Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 69 (ENGINE - 6.2L V8)SPECIFICATIONSSPECIFICATIONSPISTON
2021 Ford Edge SE, 4WD
Section 69 (Engine - 6.2L V8): Specifications: Specifications: Piston
2021 Ford Edge SE, 4WDSECTION Piston
WARNING: This page is about a different car, the 2018 Ford F-350 Super Duty and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Piston
| Item | Specification |
|---|---|
| Piston diameter - grade 1 (at right angle to pin bore) | 4.0142in (101.96mm) |
| Piston diameter - grade 2 (at right angle to pin bore) | 4.0146in (101.97mm) |
| Piston diameter - grade 3 (at right angle to pin bore) | 4.0157in (102mm) |
| Piston-to-cylinder bore clearance (at grade size) | 0.0004-0.0016in (.01-.04mm) |
| Piston pin bore diameter | 0.9449in (24mm) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.