Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2021EDGE SE, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 665 (ENGINE - 5.0L 32V TI-VCT)SPECIFICATIONSCYLINDER BLOCK
2021 Ford Edge SE, 4WD
Cylinder Block
2021 Ford Edge SE, 4WDSECTION Cylinder Block
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
|---|---|
| Cylinder bore diameter | 3.6614 -3.6622 in (93 -93.02 mm) |
| Cylinder bore maximum taper | 0.0005 in (.013 mm) |
| Cylinder bore maximum out-of-round | 0.0004 in (.01 mm) |
| Main bearing bore inside diameter | 2.850 -2.851 in (72.4 -72.424 mm) |
| Head gasket surface flatness | 0.0254 mm (0.001 in) across any 38.1 mm (1.5 in) square |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.