Electronic Engine Controls - Component Location

2021 Ford Edge SE, 4WDSECTION Electronic Engine Controls - Component Location
WARNING: This page is about a different car, the 2018 Ford F-350 Super Duty and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Electronic Engine Controls- Front 

GFD203895Courtesy of FORD MOTOR COMPANY
Item Description
1 RHVCT oil control solenoid
2 LHVCT oil control solenoid
3 EOP sensor

Electronic Engine Controls - Rear 

GFD203896Courtesy of FORD MOTOR COMPANY
Item Description
1 Catalyst monitor sensor
2 HO2S
3 CKP sensor
4 Left hand CMP sensor
5 Left hand IMRC position sensor
6 Left hand IMRC actuator
7 Right hand IMRC actuator
8 Right hand IMRC position sensor
9 CHT sensor
10 KS
11 Right hand CMP sensor
12 MAP sensor
13 HO2S
14 Catalyst monitor sensor

Powertrain Control Module (PCM) 

GFD203897Courtesy of FORD MOTOR COMPANY
Item Description
1 PCM

Clutch Pedal Position (CPP) Switch 

GFD203898Courtesy of FORD MOTOR COMPANY
Item Description
1 CPP switch
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.