Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Global Customer Symptom Code (GCSC) Chart
2021 Ford Edge SE, 4WDSECTION Global Customer Symptom Code (GCSC) Chart
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Global Customer Symptom Code Chart
| Customer Symptom | Action |
|---|---|
| Start/Run/Move > Starting > No Crank > Always | GO to Pinpoint Test A |
| Start/Run/Move > Starting > No Crank > Always | GO to Pinpoint Test B |
| Start/Run/Move > Starting > No Crank > Always | GO to Pinpoint Test I |
| Start/Run/Move > Starting > Slow Crank/Battery > Always | GO to Pinpoint Test H |
| Start/Run/Move, Starting, Push Button Start, Inoperative | GO to Pinpoint Test B |
| Start/Run/Move > Starting > Auto Start/Stop > Inoperative | GO to Pinpoint Test K |
| Start/Run/Move > Starting > Auto Start/Stop > Inoperative | GO to Pinpoint Test L |
| Start/Run/Move > Noise > Running/Standing > Always | GO to Pinpoint Test C |
| Start/Run/Move > Noise > Running/Standing > Always | GO to Pinpoint Test J |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.