Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Component View
2021 Ford Edge SE, 4WDSECTION Engine Component View
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Engine Upper
| Item | Part Number | Description |
|---|---|---|
| 1 | 9424 | Intake manifold |
| 2 | 9H486 | Intake manifold gasket |
| 3 | 9F792 | Port injection fuel rail RH |
| 4 | 9F792 | Port injection fuel rail LH |
| 5 | 9F797 | Direct injection fuel rail RH |
| 6 | 9F797 | Direct injection fuel rail LH |
| 7 | 12A699 | Knock Sensor(KS) |
Engine Front
| Item | Part Number | Description |
|---|---|---|
| 1 | 6A340/N806165/N806165 | Crankshaft pulley bolt and washer |
| 2 | 6316 | Crankshaft pulley |
| 3 | 6700 | Crankshaft front seal |
| 4 | 8A586 | Thermostat housing assembly |
| 5 | 8255 | Thermostat housing assembly O-ring seal |
| 6 | 8565 | Thermostat housing assembly O-ring Seal |
| 7 | 8A528 | Coolant pump pulley |
| 8 | 8K528 | Coolant connector inlet |
| 9 | 8A571 | Coolant connector inlet O-ring seal |
| 10 | 8501 | Coolant pump assembly |
| 11 | 6A228 | Accessory drive belt tensioner |
| 12 | 19A216 | Idler pulley |
| 13 | 6019 | Engine front cover |
Engine Front Duel Generator
| Item | Part Number | Description |
|---|---|---|
| 1 | 6A340/N806165/N806165 | Crankshaft pulley bolt and washer |
| 2 | 6316 | Crankshaft pulley |
| 3 | 6700 | Crankshaft front seal |
| 4 | 8A586 | Thermostat housing assembly |
| 5 | 8255 | Thermostat housing assembly O-ring seal |
| 6 | 8565 | Thermostat housing assembly O-ring Seal |
| 7 | 8A528 | Coolant pump pulley |
| 8 | 19A216 | Idler pulley |
| 9 | 8K528 | Coolant connector inlet |
| 10 | 8A571 | Coolant connector inlet O-ring seal |
| 11 | 8501 | Coolant pump assembly |
| 12 | 6A228 | Accessory drive belt tensioner |
| 13 | 19A216 | Idler pulley |
| 14 | 6A228 | Accessory drive belt tensioner |
| 15 | 6019 | Engine front cover |
Timing Drive Components
| Item | Part Number | Description |
|---|---|---|
| 1 | 6268 | Timing chain |
| 2 | 6268 | Timing chain |
| 3 | 6306 | Crankshaft timing sprocket |
| 4 | 6L266 | Timing chain tensioner |
| 5 | 6K255 | RH timing chain tensioner arm |
| 6 | 6B274 | RH timing chain guide assembly |
| 7 | 6L266 | Timing chain tensioner |
| 8 | 6K255 | LH timing chain tensioner arm |
| 9 | 6B274 | LH timing chain guide assembly |
| 10 | 8B593 | Channel cover plate |
Engine Upper -- LH Cylinder Head
| Item | Part Number | Description |
|---|---|---|
| 1 | 6083 | LH cylinder head gasket |
| 2 | 6050 | LH cylinder head |
| 3 | 12405 | Spark plug (3 required) |
| 4 | 6C501 | Hydraulic lash adjuster (12 required) |
| 5 | 6529 | Rocker arm (12 required) |
| 6 | 6C525 | Exhaust camshaft VCT unit |
| 7 | 6A269 | Exhaust camshaft |
| 8 | 6C254 | Intake camshaft VCT unit |
| 9 | 6A267 | Intake camshaft |
| 10 | 6A258 | Camshaft cap (4 required) |
| 11 | 6B285 | Camshaft bearing cap |
| 12 | 6B283 | Camshaft mega cap |
| 13 | 6K273 | LH valve cover |
| 14 | 6B297 | Intake camshaft VCT oil control solenoid |
| 15 | 6B297 | Exhaust camshaft VCT oil control solenoid |
| 16 | 9D376 | High pressure fuel pump |
| 17 | 12K073 | LH Intake camshaft position (CMP) sensor |
| 18 | 12K073 | LH Exhaust camshaft position (CMP) sensor |
| 19 | 9J323 | Fuel tube (fuel pump to fuel rail) |
| 20 | 9E964 | Fuel line (fuel supply) |
| 21 | 6750 | Oil level indicator |
Engine Upper -- RH Cylinder Head
| Item | Part Number | Description |
|---|---|---|
| 1 | 6049 | RH cylinder head |
| 2 | 6051 | RH cylinder head gasket |
| 3 | 6G004 | Cylinder head temperature sensor |
| 4 | 12K073 | RH Intake camshaft position (CMP) sensor |
| 5 | 12K073 | RH Exhaust camshaft position (CMP) sensor |
| 6 | 6C501 | Hydraulic lash adjuster (12 required) |
| 7 | 6529 | Rocker arm (12 required) |
| 8 | 12405 | Spark plug (3 required) |
| 9 | 6C524 | Intake camshaft VCT unit |
| 10 | 6A266 | Intake camshaft |
| 11 | 6C525 | Exhaust camshaft VCT unit |
| 12 | 6A268 | Exhaust camshaft |
| 13 | 6A258 | Camshaft cap (6 required) |
| 14 | 6B282 | Camshaft mega cap |
| 15 | 6K271 | RH valve cover |
| 16 | 6B297 | Exhaust camshaft VCT oil control solenoid |
| 17 | 6B297 | Intake camshaft VCT oil control solenoid |
Lower Engine Block
| Item | Part Number | Description |
|---|---|---|
| 1 | 6621 | Oil pump |
| 2 | 6714 | Engine oil filter |
| 3 | 6A642 | Oil cooler |
| 4 | 6884 | Oil filter adapter |
| 5 | 9D290 | Oil pressure sensor |
| 6 | 6625 | Oil pump screen and pickup tube O-ring seal |
| 7 | 6622 | Oil pump screen and pickup tube |
| 8 | 6676 | Oil Pan |
| 9 | 6A373 | Engine-to-transmission spacer plate |
| 10 | 6K301 | Crankshaft rear seal retainer |
| 11 | 12A227 | Crankshaft sensor ring |
| 12 | 6375 | Flexplate |
Lower Engine Block (View 2)
| Item | Part Number | Description |
|---|---|---|
| 1 | 6110 | Piston and connecting rod assembly (6 required) |
| 2 | 6211 | Connecting rod upper bearing (6 required) |
| 3 | 6211 | Connecting rod lower bearing (6 required) |
| 4 | 6010 | Cylinder block |
| 5 | 6K868 | Piston oil coolers (3 required) |
| 6 | 6A341 | Crankshaft upper thrust inner washer |
| 7 | 6A341 | Crankshaft upper thrust outer washer |
| 8 | 6K302 | Crankshaft lower thrust washer |
| 9 | 6333 | Cylinder block crankshaft main bearing (4 required) |
| 10 | 6303 | Crankshaft |
| 11 | 6A338 | Lower crankshaft main bearings (4 required) |
| 12 | 6325 | Lower crankshaft main bearing caps (4 required) |
| 13 | 6C364 | Main bearing cap support brace |
| 14 | W718498 | Mounting bolt - Piston oil cooler (3 required) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.