Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Valve Train Analysis - Diesel
2021 Ford Edge SE, 4WDSECTION Valve Train Analysis - Diesel
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING INFORMATION
Valve Train Analysis - Engine Off, Valve Cover Removed
NOTE:
The following component inspection is used to diagnose valve train concerns.
- Remove the valve covers.For additional information, refer to: Valve Cover LH . and For additional information, refer to: Valve Cover RH .
- Check for damaged or severely worn parts and correct assembly. Make sure correct parts are used with the static engine analysis as follows.
Visual Inspection Chart
Mechanical Check for plugged oil drain back holes.
Check for worn or damaged valve tips.
Check for damaged roller followers.
Check for worn or damaged camshafts. - Install the valve covers.For additional information, refer to: Valve Cover LH . and For additional information, refer to: Valve Cover RH .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.